简历
姓名：杨泽惠
性别：男
出生年月：1987.04.09
学历：工学博士
联系方式: yangzehui8749@126.com/18672374372
英语:CET-6: 429; TOEIC(托业): 680 (无障碍沟通)
日语: 简单会话
教育经历
2012.11-2015.09 日本九州大学应用化学博士 (导师：Prof. Naotoshi Nakashima) QS世界大学2015年排名142
2009.09-2012.06 武汉理工大学材料学工学硕士 (导师：王继辉)
2005.09-2009.06 武汉工程大学高分子材料科学与工程工学学士
工作经历
2014.04-2015.03 日本九州大学I2CNER 研究助理
2015.10-2016.03 武汉众宇动力系统有限公司 直接醇类燃料电池研发总工程师
2016.04-中国地质大学(武汉) 副研究员
获奖
1. 2009 武汉理工大学校级亚唯奖学金
2. 2010 武汉理工大学校级亚唯奖学金
3. 2010 武汉理工大学研究生学术活动先进个人
4. 2012 武汉理工大学优秀硕士论文
5. 2012 国家留学基金委(CSC)公派日本九州大学读博
6. RSC Advances审稿人
项目经历
博士期间
1. 铂粒子粒径对高温燃料电池性能以及耐久性研究 (JST-CREST，日本科学技术振兴机构)
2. Nafion燃料电池催化剂过电压降低以及性能提高研究 (丰田汽车公司)
3. 碳黑负载铂粒子催化剂耐一氧化碳毒化性以及电化学腐蚀性提高研究 (JST-CREST，日本科学技术振兴机构)
4. 直接甲醇燃料电池阳极催化剂催化性能以及耐久性提高(JST-CREST，日本科学技术振兴机构)
5. 高质子传导苯并咪唑质子交换膜合成研究(JST-CREST，日本科学技术振兴机构)
硕士期间
1. 河北电力设计院玻璃钢烟道试样力学测试 (河北电力设计院)
2. 耐热高分子光纤涂层埋入树脂基复合材料力学性能监测 (973项目)
研究兴趣
1. Nafion中温型质子交换膜燃料电池MEA性能研究
2. PBI高温型质子交换膜燃料电池质子交换膜制备以及催化剂性能和耐久性研究
3. 高耐热(聚苯并咪唑(PBI)和聚对苯撑苯并二恶唑(PBO)及其衍生物)高分子合成
4. 甲醇燃料电池催化剂制备及耐久性研究
5. 核-壳(core-shell)结构催化剂制备及其氧还原和燃料电池性能研究
6. 新型碳基锂离子阳极材料开发研究
7. 电解制氢制氧(HER/OER)
8. 有机-无机杂化材料组装
技能
1. 熟练使用电化学工作站测定电化学活性表面积(ECSA), 氧还原(ORR), 甲醇氧化(MOR),阻抗(impedance), 一氧化碳氧化(CO-stripping)和耐久性 (durability).
2. 熟练操作基础测试仪器(TGA, FT-IR, NMR, TEM, XPS, XRD, BET, Raman)
3. 精通中温(Nafion)和高温(PBI)燃料电池膜电极制备以及电池性能测试(power density, in-situ CV, in-situ CO stripping)
4. 精通高分子合成及改性
论文
1. Zehui Yang et al, A polymer-coated carbon black-based fuel cell electrocatalyst with high CO-tolerance and durability in direct methanol oxidation. J. Mater. Chem. A, 2014, 2, 18875-18880. ( 一区，7.44)
2. Zehui Yang et al. Phosphoric acid-doped electrocatalyst supported on para-pyridine-contained polybenzimidazole-wrapped carbon nanotubes shows a high durability and performance. J. Mater. Chem. A, 2015, 3, 14318-14324. ( 一区，7.44)
3. Zehui Yang et al. Poly(vinylpyrrolidone)-Wrapped Carbon Nanotube-Based Fuel Cell Electrocatalyst Shows High Durability and Performance Under Non-Humidified Operation. J. Mater. Chem. A. Accepted. ( 一区，7.44)
4. Zehui Yang et al. A durable Pt electrocatalyst supported on a 3D nanoporous carbon shows a high performance in a high-temperature polymer electrolyte fuel cell. ACS Appl. Mater. Interfaces, 2015, 7, 9800-9806. ( 一区，6.72)
5. Zehui Yang et al. Facile Enhancement in CO Tolerance of Pt electrocatalyst supported on carbon black-Comparison between Vulcan and Ketjenblack. ACS Appl. Mater. Interfaces, 2015, 7, 15885-15891. ( 一区，6.72)
6. Zehui Yang et al. Homogeneous Coating of Ionomer on Electrocatalyst Assisted by Polybenzimidazole as an Adhesive Layer and its Effect on Fuel Cell Performance. J. Power Sources, 2015, 300, 175-181. ( 一区，6.22)
7. Zehui Yang et al. A simple preparation of very high methanol tolerant cathode electrocatalyst for direct methanol fuel cell based on polymer-coated carbon nanotube/platinum. Sci. Rep., 2015, 5, article number 12236. ( 二区，5.58)
8. Zehui Yang et al. An Enhanced Anode based on Polymer-Coated Carbon Black for use as a Direct Methanol Fuel Cell Electrocatalyst. ChemcatChem, 2015, 7, 808-813. ( 二区，4.56)
9. Zehui Yang et al. A Poly(Vinylpyrrolidone)-coated Carbon Nanotubes-based Electrocatalyst Shows a High CO tolerance in Direct Methanol Fuel Cell. ChemcatChem, 2016, 8, 600-606.
10. Zehui Yang et al. NaOH-aided Platinum-Nanoparticle Size Regulation on Polybenzimidazole-Wrapped Carbon Nanotube for use as Non-humidified-Operated Polymer Electrolyte Fuel Cell Catalyst. ChemcatChem. 2016, 8, 268-275.
11. Zehui Yang et al. Design of Polymer-Coated Multi-Walled Carbon Nanotube/Carbon Black-based Fuel Cell Catalysts with High Durability and Performance Under Non-humidified Condition. Electrochim. Acta, 2015, 170, 1-8. ( 二区，4.5)
12. Zehui Yang et al. A Highly Durable, CO-tolerant Poly(vinylphosphonicacid) coated Electrocatalyst Supported on a Nanoporous Carbon. ACS Appl. Mater. Interfaces. Just Accepted.
13. Zehui Yang et al. Pt nanoparticles deposited on OH-functionalized polybenzimidazole wrapped carbon nanotubes shows a remarkable durability in methanol electro-oxidation. In preparation.
14. Zehui Yang et al. Bottom-up design of CO-tolerant electrocatalyst using poly(vinylphosphonic acid) doped polybenzimidazole. In preparation.
15. Zehui Yang et al. A facile polymer coating method to enhance the long-term durability of Pt electrocatalyst deposited on oxidized carbon nanotubes. In preparation.
16. Zehui Yang et al. A remarkable durability and mass power density of Pt cluster supported on polybenzimidazole wrapped carbon nanotubes. In preparation.
17. Zehui Yang et al. Enhancement in the Pt utilization efficiency supported on the polybenzimidazole coated carbon black. In preparation.
博士期间文章(非一作)
1. C. Kim, Zehui Yang, T. Fujigaya, N. Nakashima. One-pot synthesis of Pt-Pd core-shell electrocatalsyt for oxygen reduction reaction, submitted. In preparation.
2. W. T. Dhammika, Zehui Yang, T. Fujigaya, N. Nakashima. Durability Comparison between MWNTs and SWNTs. In preparation.
3. H. Inas, Zehui Yang, M. Berber, T. Fujigaya, N. Nakashima. High Mass activity of a carbon black based electrocatalyst for high-temperature polymer electrolyte fuel cell. In preparation.
4. M. Nasef, T. Fujigaya, A-L. Ebrahim, Zehui Yang, Enhancement of properties of nanocomposite phosphoric acid-doped 2,6-pyridine polybenzimidazole fuel cell membranes: optimization of acid doping and content of zirconium oxide nanoclusters, Submitted.
硕士期间(均为一作)
1. Zehui Yang et al, Synthesis and Characterization of Novel Ultraviolet-Curing Polyurethane Acrylate/Epoxy Acrylate/SiO2 Hybrid Materials via Sol-Gel Reaction. J. Appl. Polym. Sci., 2013, 127, 2905-2909.
2. Zehui Yang et al, Preparation and Characterization of Epoxy Acrylate/Mesoporous Silica Composite Materials. Asian J. Chem., 2012, 24, 2744-2746.
3. 杨泽惠等, 纳米SiO2/PUA-EA布拉格光栅传感器涂层耐热性能评估, 复合材料学报， 2013, 30, 135-138.
4. 杨泽惠等，溶胶-凝胶法制备紫外光固化聚氨酯丙烯酸酯/环氧丙烯酸酯/纳米二氧化硅杂化材料, 高分子材料科学与工程, 2013, 29, 121-124.
会议
Durable and CO-tolerant catalyst for methanol oxidation reaction (Oral), The 55th battery Symposium, Kyoto, 2014
Remarkable Durability and Methanol Oxidation Reaction of a Polymer-coated CB-based Electrocatalyst (Oral), The 82th Electrochemical Conference, Yokohama, 2015
Carbon black and carbon nanotubes as hybrid supports for electrochemical catalyst (Poster), The 12th Asian Conference on Analytical Sciences, Kyushu University, 2013
Platinum Nanoparticles deposited on the hybrids of multi-walled carbon nanotubes and carbon black for methanol oxidation (Poster), International Conference on Hydrogen Production-2014, Kyushu University, 2014
Multi-walled carbon nanotubes and carbon black supported platinum nanoparticles for catalyst of polymer electrolyte membrane fuel cells(Poster), The 46th Fullerenes-Nanotubes-Graphene General Symposium, The University of Tokyo, 2014
Poly(vinylphosphonic acid)-Coated Catalyst for Direct Methanol Oxidation with Enhanced CO Tolerance and Durability (Poster), The 14th Link-tube Super Molecular Symposium, Kyushu University, 2014
